Contact Us

  • Add:No. 87, Huicui Road, Huishan District, Wuxi, Jiangsu
  • Tel:+86-510-83704314 83623338
  • Fax:+86-510-83622889 83704835
  • E-mail:master@wuxibelt.com
Position:Home>Technology & Research

Timing Belt Error Parts Analysls

ERROR ATTITUDE :Snapped 
REASONS:
1.Foreign objects in the transmission system
2.Corroded by fluids, oil or other things
3. Hit by other auto parts
4.Pretension too high
5.Belt crimped before using


OLUTIONS:
1.Take out the foreign objects, check all the components for damaging, if the damaged is serious, pls change the belt with the damaged parts together
2.Eliminate the leaks if they are in this system, clean every parts, pls change the belt
3.To check whether every parts of this system are in their right position, correct their location then change the belt 4.Correct tensile strength then change the belt 5.Change the belt and confirm the belt is not crimped before or while fitting

   
 

ERROR ATTITUDE: One edge abrade  
REASONS:
1.Pulleys not parallel or offset: belt running off or even out of the flange
2.One pulley flange is error
3.Play in component bearings SOLUTIONS:
1.Check the parallel rate of the pulleys and change the belt
2.Exchange the error idler or tension pulleys into the qualified one and change the belt

 

Address: Wuxi Huishan Cui Hui Road 87 Tel:+86-510-83704314 83623338 Fax:+86-510-83622889 83704835 E-mail:master@wuxibelt.com

webpage copyright:Wuxi Belt Rubber Belts Co., Ltd 《中华人民共和国电信与信息服务业务经营许可证》编号:苏ICP备5656566号