Contact Us

  • Add:No. 87, Huicui Road, Huishan District, Wuxi, Jiangsu
  • Tel:+86-510-83704314 83623338
  • Fax:+86-510-83622889 83704835
  • E-mail:master@wuxibelt.com
Position:Home>Technology & Research

Row Edged V Belt Parts Analysls

 

ERROR ATTITUDE: Snapped

REASONS:
1.Tension strength is extremely too high
2.Foreign part coming into the transmission system or other parts of this system error or not in the right position SOLUTIONS:
1.Correct the tensile strength, check the pulley parallel then change the belt
2.Remove the foreign parts and make sure the position of each part in this system is right then change the belt

 

ERROR ATTITUDE: Cracks
REASONS:
1.Belt tension too low or too high
2.Belt working with the too high temperature 3.Belt lifetime exceeded
SOLUTIONS:
1.Change the belt and correct the tensile strength 2.Check whether the fan function well and tight ancillary com-ponents then change the belt
3.Change a new belt

ERROR ATTITUDE: One edge worn up
REASONS:
1.The pulley not parallel, one edge worn by the flange
2.The belt have serious flapping while running
3.Pulley error
SOLUTIONS:
1.Adjust the parallel rate of the pulleys and change the belt
2.Adjust the tensile strength and change the belt
3.Change the error pilleys and belt

Address: Wuxi Huishan Cui Hui Road 87 Tel:+86-510-83704314 83623338 Fax:+86-510-83622889 83704835 E-mail:master@wuxibelt.com

webpage copyright:Wuxi Belt Rubber Belts Co., Ltd 《中华人民共和国电信与信息服务业务经营许可证》编号:苏ICP备5656566号