Timing Belt Error Parts Analysls

Time：2015-03-09 22:29:42 Click： Author：admin

		ERROR ATTITUDE: Teeth root fabic abrade REASONS: 1.Tensile strength is set too high 2.Timing belt pulley moving while running 3.Belt overload or the transmission power is higher than design SOLUTIONS: 1.Correct the tensile strength and change a new belt 2.Change a qualified pulley and change a new belt 3.Choose a right width belt


		ERROR ATTITUDE: Crack on belt back REASONS: 1.The temperature is too high 2.The idler seized/tight reversed cause the belt back overhead 3.Lifetime exceeded SOLUTIONS: 1.When we are using the HNBR timing belt we need to improve the head radiadtion 2.Change idler and belt, chrck whether the nee idler can rotate freely 3.Change the belt


		ERROR ATTITUDE: Teeth shear from the belt body REASONS: 1.Overload 2.The temperature is too high 3.Oil or fluids on the belt 4.Tensile strength too high or too low 5.Other parts hit the belt SOLUTIONS: 1.Correct the tension pulley’s tensile strength 2.When we are using the HVBR timing belt we need to improve the heat radiation 3.Eliminate the leaks and change a new belt 4.Take our the foreign objects